Control Valves

Quality Control valves valves for your project

Quality Control valves valves for your project

Model B-16, Fixed Orifice Valve

Non-Modulating energy dissipating sleeve is designed to mount between two flanges and inserts inside a pipeline for inline flow and pressure control.

Model B-14, Wall Mounted Discharge Valve

Superior performance control valve for flow control, energy dissipation, pump control, tank control, and metering vaults. The valve dissipates energy and controls flow by diverting the water through multiple orifices located within the sleeve.

Model B-12, 90 Degree Valve

Superior performance control valve for angle flow control, energy dissipation, pump control, tank control, and metering vaults. The valve dissipates energy and controls flow by diverting the water through multiple orifices located within the sleeve.

Model B-11 Submerged Discharge Valve

Valve dissipates energy and controls flow by diverting the water through multiple orifices located within the sleeve discharging to atmosphere or body of water.

Model B-10 Horizontal Valve

Inline horizontal flow and pressure control valve that directs water over a nose cone into a chamber that is housed between the other body and the sleeve/gate assembly. Each sleeve is custom designed with multiple sized and spaced tapered nozzles for each specific project and application.

Model B-5 Inline Y-Pattern Valve

Superior performance control valve for flow control, energy dissipation, pump control, tank control, and metering vaults. The valve dissipates energy and controls flow by diverting the water through multiple orifices located within the sleeve.

AUTOMATED PILOT CONTROL VALVES

Pressure management systems – utilizing pressure reducing pilot to give adjustable pressure settings based on system demand.

PLUNGER CONTROL VALVES

Plunger Control Valves have an optimized annular cross section used to control pressure and/or flow.

SEGMENTED BALL CONTROL VALVES

Segmented Ball Valve Control Valves is similar to a conventional ball valve, but with a V-notch Segment.

FIXED CONE VALVE

Fixed Cone Valves are used to regulate flow from dams and reservoirs. Commonly used as a turbine bypass, reservoir drain, or continuous discharge flow control.

Pressure Control Valves

The valve shall maintain relatively accurate control of the downstream pressure regardless of fluctuation in flow or upstream pressure.

PUMP CONTROL VALVES

Slowly opens to regulate initial flow into a piping system

ALTITUDE AND LEVEL CONTROL VALVES

The valve allows normal forward flow to fill the reservoir to the maximum level then closes drip-tight at the set-point. It opens to refill the tank once the level drops a fixed distance below the high water level.

Lorem ipsum

Subscribe to our newsletter

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Request a Quote

Fill in the form and our team will be happy to assist you